Timeline for 3D printing with blender
Current License: CC BY-SA 3.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 6, 2016 at 21:45 | history | migrated | from blender.stackexchange.com (revisions) | ||
| Jun 6, 2016 at 20:29 | vote | accept | CommunityBot | ||
| Jun 6, 2016 at 20:07 | comment | added | Ulus | Hm ok, i guess extruding and re-sizing the duplicated mesh to the inside will also work, then i will use a Boolean modifier to make a hole with a cylinder, that should work :) | |
| Jun 6, 2016 at 19:59 | comment | added | Shady Puck | @Ulus A hole? The solidify modifier will ensure that it is just walls. Do you want to be able to stick something inside through a hole? If you do, perhaps in the middle-back of the blocky mesh, underneath the center handhold. | |
| Jun 6, 2016 at 19:56 | comment | added | Ulus | Thanks again, for answering. Also i dont want the object to be solid inside, so would it be best to place a hole behind it? (I saw people do this in video tutorials )And if so where would be the best place? Please let me know if you have an idea i would be pleased :) | |
| Jun 6, 2016 at 19:53 | comment | added | Shady Puck | @Ulus That would probably be best. If my answer helped, please consider accepting it. | |
| Jun 6, 2016 at 19:52 | comment | added | Ulus | I have attached 2 images if you look up, i have another question. How should i place my object for printing? Should i put the text side face down so that it has something to stand on? | |
| Jun 6, 2016 at 18:54 | history | answered | Shady Puck | CC BY-SA 3.0 |