Skip to main content
3D Printing

Return to Answer

Fix "SMarlin", a non-existent firmware; fix other grammar and spelling mistakes.
Source Link
edit approved Aug 21, 2021 at 21:24
tjcaul
edit approved Aug 21, 2021 at 21:24
tjcaul
  • 233
  • 1
  • 8

My Man, The Ender 3 SMarlinMarlin firmware saves your E-Steps on the SD Card and you basiclybasically have to check the E-Steps every startup because the Firmware sets back the E-Steps Value every shutdown to the minimum 93. Thats a known issue of the Enders and still on the Mk.3 aka Ender 3v2 present. ItsIt's an easy Fixfix.

My Man, The Ender 3 SMarlin firmware saves your E-Steps on the SD Card and you basicly have to check the E-Steps every startup because the Firmware sets back the E-Steps Value every shutdown to the minimum 93. Thats a known issue of the Enders and still on the Mk.3 aka Ender 3v2 present. Its an easy Fix

My Man, The Ender 3 Marlin firmware saves your E-Steps on the SD Card and you basically have to check the E-Steps every startup because the Firmware sets back the E-Steps Value every shutdown to the minimum 93. Thats a known issue of the Enders and still on the Mk.3 aka Ender 3v2 present. It's an easy fix.

Source Link
GabbaGandalf
GabbaGandalf
  • 11
  • 1

My Man, The Ender 3 SMarlin firmware saves your E-Steps on the SD Card and you basicly have to check the E-Steps every startup because the Firmware sets back the E-Steps Value every shutdown to the minimum 93. Thats a known issue of the Enders and still on the Mk.3 aka Ender 3v2 present. Its an easy Fix