Timeline for Extruder skips steps, when filament is manually pushed through the extruder it works somewhat "flawlessly"
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Sep 5, 2021 at 17:19 | comment | added | 0scar♦ | When a different stepper is installed you need to make sure that it is properly setup, i.e. the reference voltage, or current, needs to be manually set or specified in the firmware depending on the type of drivers you use. | |
| Sep 5, 2021 at 16:10 | history | edited | agarza | CC BY-SA 4.0 |
fixed capitalization, punctuation, grammar, formatting
|
| S Sep 5, 2021 at 16:02 | review | First answers | |||
| Sep 5, 2021 at 17:07 | |||||
| S Sep 5, 2021 at 16:02 | history | answered | Jannick | CC BY-SA 4.0 |