Timeline for 3D Printing with malicious intent
Current License: CC BY-SA 4.0
10 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jan 13, 2022 at 5:50 | comment | added | OneWasNotEnough | @R..GitHubSTOPHELPINGICE Thomas's video that I submitted in my answer demonstrates this concept. :) | |
| Jan 11, 2022 at 20:18 | comment | added | R.. GitHub STOP HELPING ICE | The most sure way to cause significant damage is probably to print a solid block of plastic then slowly lower the hotend into it while continuing to extrude. This does not rely on bypassing endstops because the object you're hitting isn't part of the printer but something dynamically created. | |
| Jan 11, 2022 at 19:17 | history | edited | 0scar♦ | CC BY-SA 4.0 |
typo
|
| Jan 11, 2022 at 14:01 | comment | added | Perry Webb | Disabling endstops usually just causes the printer to lose track of the origin when the printer tries to go past the end stop. | |
| Jan 11, 2022 at 13:59 | history | edited | agarza | CC BY-SA 4.0 |
fixed formatting
|
| Jan 11, 2022 at 12:29 | comment | added | user10489 | If you want to tear up a printer, I suggest a hammer. | |
| Jan 11, 2022 at 11:47 | comment | added | 0scar♦ | Thanks for not providing a manual to tear up a printer! I can think of a couple of ways, but refrained to answer to have a dedicated landing page for people that want to destroy other peoples' machines. Very elegantly answered by dodging/bending/interpreting the question to not running pre-compiled G-code which is very good advice!. Welcome to 3DPrinting.SE! | |
| Jan 11, 2022 at 11:20 | history | edited | OneWasNotEnough | CC BY-SA 4.0 |
Expanded on some additional protections
|
| S Jan 11, 2022 at 11:14 | review | First answers | |||
| Jan 11, 2022 at 13:56 | |||||
| S Jan 11, 2022 at 11:14 | history | answered | OneWasNotEnough | CC BY-SA 4.0 |