Preheat Constants - Up to 5 are supported without changing the code just add a new one and then build

#define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 215 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255

#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 235 #define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255

#define PREHEAT_3_LABEL "ABS" #define PREHEAT_3_TEMP_HOTEND 270 #define PREHEAT_3_TEMP_BED 100 #define PREHEAT_3_TEMP_CHAMBER 35 #define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255

#define PREHEAT_4_LABEL "NYLON" #define PREHEAT_4_TEMP_HOTEND 260 #define PREHEAT_4_TEMP_BED 65 #define PREHEAT_4_TEMP_CHAMBER 35 #define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255

Preheat Constants - Up to 5 are supported without changing the code just add a new one and then build

#define PREHEAT_1_LABEL       "PLA"
#define PREHEAT_1_TEMP_HOTEND 215
#define PREHEAT_1_TEMP_BED     70
#define PREHEAT_1_TEMP_CHAMBER 35
#define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255

#define PREHEAT_2_LABEL       "PETG"
#define PREHEAT_2_TEMP_HOTEND 235
#define PREHEAT_2_TEMP_BED    70
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255

#define PREHEAT_3_LABEL       "ABS"
#define PREHEAT_3_TEMP_HOTEND 270
#define PREHEAT_3_TEMP_BED    100
#define PREHEAT_3_TEMP_CHAMBER 35
#define PREHEAT_3_FAN_SPEED     0 // Value from 0 to 255

#define PREHEAT_4_LABEL       "NYLON"
#define PREHEAT_4_TEMP_HOTEND 260
#define PREHEAT_4_TEMP_BED     65
#define PREHEAT_4_TEMP_CHAMBER 35
#define PREHEAT_4_FAN_SPEED     0 // Value from 0 to 255
```