Timeline for Printer prints only candy floss
Current License: CC BY-SA 4.0
15 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 24 at 17:39 | answer | added | skewray | timeline score: 3 | |
| May 22 at 16:26 | history | edited | 0scar♦ | CC BY-SA 4.0 |
unit spacing according to standard
|
| May 22 at 16:18 | history | edited | 0scar♦ | CC BY-SA 4.0 |
unit spacing according to standard
|
| May 22 at 5:56 | comment | added | skewray | Cura won't communicate with the printer for some reason, although I could use a USB stick, I guess. | |
| May 21 at 21:00 | history | edited | skewray | CC BY-SA 4.0 |
update
|
| May 21 at 20:38 | history | edited | 0scar♦ | CC BY-SA 4.0 |
edited tags, improved formatting
|
| May 21 at 20:28 | history | edited | 0scar♦ |
edited tags
|
|
| May 21 at 20:22 | comment | added | 0scar♦ | Hi and welcome to 3DPrinting.SE! You are definitely under extruding! Please check if your extruder is skipping, if the filament rolls of easily from the spool, the filament is not entangled, the extruder is cleaned. Basically, make sure that there is virtually no option for the filament to slip. If you checked all that, post an dere if it is fixed or add what you tried to the question to prevent answers delving into these possibilities. Tried a different slicer? | |
| May 21 at 19:59 | history | edited | skewray | CC BY-SA 4.0 |
added 12 characters in body
|
| May 21 at 19:58 | history | edited | skewray | CC BY-SA 4.0 |
added photo
|
| May 20 at 5:01 | history | edited | skewray | CC BY-SA 4.0 |
added 12 characters in body
|
| May 20 at 5:00 | history | edited | skewray | CC BY-SA 4.0 |
Implemented agarza's template
|
| May 20 at 3:00 | history | edited | agarza | CC BY-SA 4.0 |
added settings template
|
| S May 20 at 0:25 | review | First questions | |||
| May 20 at 3:04 | |||||
| S May 20 at 0:25 | history | asked | skewray | CC BY-SA 4.0 |