Timeline for Support material first layer adhesion issues
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 9, 2018 at 12:06 | comment | added | gbe | @SeanHoulihane, In my early days with my Creator Pro the highly effective heated bed sometimes got ABS prints stuck so hard that I damaged the bed (gouged the aluminium below the surface coating) getting them off. The glue-stick helps to keep parts firmly in place while printing, but it also stops them from getting stuck on like concrete. It seems to be a Goldilocks Zone... not too weak, not too strong, but just right! | |
| Apr 9, 2018 at 6:58 | comment | added | Sean Houlihane | With a good bed surface (as I believe this printer has), this shouldn't be necessary - but you're right, it's a useful 'quick fix' whilst getting more familiar with the details. | |
| Apr 9, 2018 at 6:12 | review | First posts | |||
| Apr 9, 2018 at 6:58 | |||||
| Apr 9, 2018 at 6:08 | history | answered | gbe | CC BY-SA 3.0 |