If I set temperature say 220 °C, printer heats up to it and it only varies +/- 0.5 °C under non operating condition. But if I start a print, there's a shift of +/- 15 °C.
I've already auto tuned PID parameters and Whenwhen I run M503, the printer shows the updated PID values.
What could be the reason?
Electronics details:
If I set temperature say 220 °C, printer heats up to it and it only varies +/- 0.5 °C under non operating condition. But if I start a print, there's a shift of +/- 15 °C.
I've already auto tuned PID parameters and When I run M503, printer shows the updated PID values.
What could be the reason?
Electronics details:
If I set temperature say 220 °C, printer heats up to it and it only varies +/- 0.5 °C under non operating condition. But if I start a print, there's a shift of +/- 15 °C.
I've already auto tuned PID parameters and when I run M503, the printer shows the updated PID values.
What could be the reason?
Electronics details:
If I set temperature say 220 degree °C, printer heats up to it and it only varies +/- 0.5 degree °C under non operating condition. But if I start a print, there's a shift of +/- 15 degrees 15 °C. I've
I've already auto tuned PID parameters and When I run M503M503, printer shows the updated PID values. [![enter image description here][1]][1]
What could be the reason?? [1]: https://i.sstatic.net/w8SCE.png
FW Electronics details: Marlin
Controller : Printrboard rev D
If I set temperature say 220 degree, printer heats up to it and it only varies +/-0.5 degree under non operating condition. But if I start a print, there's a shift of +/- 15 degrees. I've already auto tuned PID parameters and When I run M503, printer shows the updated PID values. [![enter image description here][1]][1]
What could be the reason?? [1]: https://i.sstatic.net/w8SCE.png
FW : Marlin
Controller : Printrboard rev D
If I set temperature say 220 °C, printer heats up to it and it only varies +/- 0.5 °C under non operating condition. But if I start a print, there's a shift of +/- 15 °C.
I've already auto tuned PID parameters and When I run M503, printer shows the updated PID values.
What could be the reason?
Electronics details:
