Timeline for Adding additional extrusion to a raft (raft with a skirt?)
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 11, 2018 at 0:25 | comment | added | 0scar♦ | @GoneCoding Start extruding lower then, play with the height, you could even extrude and raise the nozzle at the same time. Ultimaker does use this priming method on the Ultimaker 3, works like a charm, even with ABS. It even works for POM, which is way harder to print and prime than ABS. | |
| Nov 10, 2018 at 21:44 | comment | added | iCollect.it Ltd | Hi Oscar, dropping an ABS puddle in mid air results in a balling effect rather than it dropping away. I will investigate the follow-up wipe next. I don’t know g-code we’ll enough yet, but can you extrude from a given point continuously as a line on the bed ending where the print begins, or is extrusion always absolute segments at a given rate? I need a running start. | |
| Nov 9, 2018 at 10:24 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Improved formatting, better answered the question with respect to the questions
|
| Nov 8, 2018 at 16:15 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Updated
|
| Nov 8, 2018 at 16:07 | history | answered | 0scar♦ | CC BY-SA 4.0 |