Notice removed Content dispute by CommunityBot

occurred Feb 26, 2019 at 20:47

Post Unlocked by CommunityBot

occurred Feb 26, 2019 at 20:47

Post Locked by MakerModder

occurred Feb 25, 2019 at 20:46

Notice added Content dispute by MakerModder

occurred Feb 25, 2019 at 20:46

Rollback to Revision 9

Source Link

edited Feb 25, 2019 at 17:43

0scar ♦

37.1k
12
67
155

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

There isI have an issue in the software of thewith my Anet A8 printer, that causes a break in printing, if there is a special character in the G-code; e.g. something like the German ä, ö and ü just let the Anet A8 stops workinghow it interlocks with Ultimaker Cura.

This character can get into the G-codeI want to print this file through Ultimakernamed Loki_hörner_v2.stland Cura slices it fine, that insert comments like

;MESH:Loki_hörner_v2.stl

intobut when it comes to printing all the preheat happens, but then it stops, not going on at all. What might be wrong here?

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

There is an issue in the software of the Anet A8 printer, that causes a break in printing, if there is a special character in the G-code; e.g. something like the German ä, ö and ü just let the Anet A8 stops working.

This character can get into the G-code file through Ultimaker Cura, that insert comments like

;MESH:Loki_hörner_v2.stl

into it.

Anet A8 stops printing

I have an issue with my Anet A8 printer and how it interlocks with Ultimaker Cura.

I want to print this file named Loki_hörner_v2.stland Cura slices it fine, but when it comes to printing all the preheat happens, but then it stops, not going on at all. What might be wrong here?

Rollback to Revision 8

Source Link

edited Feb 25, 2019 at 16:42

Horitsu

668
4
16

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

I haveThere is an issue with myin the software of the Anet A8 printer, that causes a break in printing, if there is a special character in the G-code; e.g. something like the German ä, ö and how it interlocks with Ultimaker Curaü just let the Anet A8 stops working.

I want to print thisThis character can get into the G-code file named Loki_hörner_v2.stlandthrough Ultimaker Cura slices it fine, but when it comes to printing all the preheat happens, but thenthat insert comments like

;MESH:Loki_hörner_v2.stl

into it stops, not going on at all. What might be wrong here?

Anet A8 stops printing

I have an issue with my Anet A8 printer and how it interlocks with Ultimaker Cura.

I want to print this file named Loki_hörner_v2.stland Cura slices it fine, but when it comes to printing all the preheat happens, but then it stops, not going on at all. What might be wrong here?

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

There is an issue in the software of the Anet A8 printer, that causes a break in printing, if there is a special character in the G-code; e.g. something like the German ä, ö and ü just let the Anet A8 stops working.

This character can get into the G-code file through Ultimaker Cura, that insert comments like

;MESH:Loki_hörner_v2.stl

into it.

Reworded back into a question. A question must be a question.

Source Link

edited Feb 25, 2019 at 11:22

Trish

22.5k
13
51
104

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

There isI have an issue in the software of thewith my Anet A8 printer, that causes a break in printing, if there is a special character in the G-code; e.g. something like the German ä, ö and ü just let the Anet A8 stops workinghow it interlocks with Ultimaker Cura.

This character can get into the G-codeI want to print this file through Ultimakernamed Loki_hörner_v2.stland Cura slices it fine, that insert comments like

;MESH:Loki_hörner_v2.stl

intobut when it comes to printing all the preheat happens, but then it stops, not going on at all. What might be wrong here?

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

There is an issue in the software of the Anet A8 printer, that causes a break in printing, if there is a special character in the G-code; e.g. something like the German ä, ö and ü just let the Anet A8 stops working.

This character can get into the G-code file through Ultimaker Cura, that insert comments like

;MESH:Loki_hörner_v2.stl

into it.

Anet A8 stops printing

I have an issue with my Anet A8 printer and how it interlocks with Ultimaker Cura.

I want to print this file named Loki_hörner_v2.stland Cura slices it fine, but when it comes to printing all the preheat happens, but then it stops, not going on at all. What might be wrong here?

edited title

Link

edited Feb 25, 2019 at 5:51

Horitsu

668
4
16

Loading

Improved formatting

Source Link

edited Feb 24, 2019 at 21:19

0scar ♦

37.1k
12
67
155

Loading

Rollback to Revision 3

Source Link

edited Feb 24, 2019 at 21:09

Horitsu

668
4
16

Loading

edited title

Link

edited Feb 24, 2019 at 20:17

Trish

22.5k
13
51
104

Loading

Rollback to Revision 2

Source Link

edited Feb 24, 2019 at 20:13

Trish

22.5k
13
51
104

Loading

Changed the missleading question into a information for all.

Source Link

edited Feb 24, 2019 at 19:41

Horitsu

668
4
16

Loading

edited tags

Link

edited Feb 24, 2019 at 18:52

Trish

22.5k
13
51
104

Loading

Source Link

asked Feb 24, 2019 at 18:00

Horitsu

668
4
16

Loading

Stack Exchange Network

Return to Question

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

Anet A8 stops printing

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

Anet A8 stops printing

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

Anet A8 stops printing when there are special characters like ö, ü, ä in the g-code

Anet A8 stops printing