Timeline for Extruder clicking issue with MKS Board v1.5
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 1, 2019 at 17:19 | comment | added | silver | 1200 mm/m is not high enough. That is only 20mm/s. Run m503 to see the limit in firmware, and approach that value. | |
| Mar 1, 2019 at 10:54 | comment | added | Hlias | Hi Silver! Thanks for your comment. I have tried the speeds as you mentioned and I cannot make it click ranging from 300 up to 1200. So yes, apparently the problem is elsewhere. Filament getting caught is not the issue as the extrusion is fine when not printing, motor wire is not damaged as I have already tried 3 different motors. | |
| Feb 28, 2019 at 23:29 | history | answered | silver | CC BY-SA 4.0 |