Timeline for Add a laser module to Reprap Guru Prusa i3
Current License: CC BY-SA 4.0
13 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 22, 2019 at 23:58 | vote | accept | codeNinja | ||
| May 18, 2019 at 13:23 | comment | added | Perry Webb | The ideal would be to change out all the plexiglass in the enclose with the equivalent of the safety glasses for the frequency of you laser. Otherwise, you need to restrict access during laser operation. | |
| May 18, 2019 at 11:59 | history | edited | codeNinja | CC BY-SA 4.0 |
deleted 1 character in body
|
| May 18, 2019 at 6:17 | history | edited | 0scar♦ |
edited tags
|
|
| May 18, 2019 at 5:54 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Improved formatting
|
| May 18, 2019 at 5:49 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Improved formatting
|
| May 18, 2019 at 5:36 | answer | added | 0scar♦ | timeline score: 7 | |
| May 18, 2019 at 3:32 | comment | added | codeNinja | Yes glasses are covered. Have gotten the setup work without PWM. Need that to achieve grayscale | |
| May 18, 2019 at 0:53 | comment | added | fred_dot_u | Ensure that you have correct safety glasses for the frequency of your laser diode. There are many versions of laser safety glasses, but you must match your laser to the glasses, when using such a high power diode laser. Ensure also that anyone within view of the machine has these glasses as well. Reflections from a five watt laser will destroy tissue without the awareness of the victim. You may already be aware of this consideration. | |
| May 17, 2019 at 22:31 | history | edited | codeNinja | CC BY-SA 4.0 |
added 294 characters in body; edited tags
|
| May 17, 2019 at 20:47 | history | edited | Trish |
edited tags
|
|
| May 17, 2019 at 20:20 | review | First posts | |||
| May 18, 2019 at 6:00 | |||||
| May 17, 2019 at 20:19 | history | asked | codeNinja | CC BY-SA 4.0 |