I am trying to print a model that has (at the start of the print) several small parts attached to the bed. Some of these parts have bed contact 2.5mm x 20mm.
After a few layers, if there are any imperfections in the previous layer, the hotend is bumping the imperfection and knocking the part loose.
I am using a genuine Prusa i3 Mk2s with Filaform PLA. I am slicing with PrusaControl and using the "Generic PLA" settings, which is giving me 215/210 degree hot end (first/other layers), and 55 degree bed. I have the fan enabled. The print bed is clean and dust free
How can I improve bed adhesion for these small parts, ideally without adding brims etc?
Thanks