After printing successfully for a while I received an error saying:
Tool 0 Failure!
Temp limit reached
Shutdown or restart.
The front panel is not responsive and doesn't allow the printer to print at all. If I quickly go to monitor mode it shows tool 0 temperature in the ~700°C range; which made me think it was the thermocouple.On the motherboard I unplugged the thermocouple and the same error occurred, I then swapped the other thermocouple and put it in its place and got the same error except the tool 1 temperature showed "NC".
I had recently taken apart the extruders to change out the nozzles and thought I had possibly smashed the wires when putting it together but now I don't think that's the case.
I'm on the phone with FlashForge's tech support but wanted to see if someone else has had the same experience for cross reference.
What's the underlying issue? Is there a quick solution to this that can get me printing right away (I'm under a deadline)? What's the end solution?