I understand that this is probably more of an electronics question, but was hoping that someone with experience of using an Anet A6 in the UK (or a country outside of the US/China) may be able to help... or alternatively, someone knowledgeable in electronics!
I recently bought and assembled an Anet A6. I am based in the UK. On the power supply transformer of the Anet A6, there is a switch that allows you to select the input voltage from the mains. There are two options, 100 V or 220 V.
When I turn my Anet A6 printer on, nothing happens... I have triple checked all connections and there doesn't seem to be anything wrongly connected or loose.
I am wondering if the reason it is not working is because in the UK we use a different mains voltage 230 V (I think) and a different frequency 50 Hz (I think) to the US and China (which I assume the printer was built to accommodate)?... I am not 100 % sure on this, just a guess, I am far from an electronics expert.
I don't have a multimeter to test if there is voltage flowing (not that I would even know how to test it lol). Is it likely that this difference between voltage/freq is the reason that it is not working? If so, is there anyway to fix this? I would prefer to buy something (some sort of converter) than tinker with the electronics, as I have no experience in electronics and live in a rented flat, which I really don't want to burn down (not that I would if i owned it).
Any help is massively appreciated, thanks in advance!
I have done what @Oscar suggested and also bought a multimeter to test the circuitry. I plugged my Anet A6 into the mains power supply and turned it on, but still nothing happens... the LED doesn't light up, not does the LCD screen turn on.
I tested the voltage of the power supply whilst it was turned on across connections 6 and 8 in the video below (taken from the assembly instructions video, 12 mins 46 seconds):
The 6 and 8 connections correspond to the output from the transformer (ie the connections that would be connected to the mainboard). There was no voltage reading at all when I measured it here with the multimeter. Does this indicate that there is a problem with the transformer/power supply, or is this expected? Or am I testing in the wrong place and there is a better place to test when the printer is on to determine what the problem might be?