# Dots in Cura on Prepare-mode

When I load a figure in Cura 4.6.1 I get weird dots all over my figure in Prepare-mode.

How come, and can I turn it off?

It's on every model I load :( I am fairly sure the normals are facing the correct way as well.

Solution found!

If Display model errors is disabled, the dots appears. Check the setting, hit OK, click on the box and they disappear.

• Great to post the solution! Always eager to learn something! Please accept the answer after 48 hours of posting, else the question gets popping up in the cue! Thanks!
– 0scar
May 23 '20 at 12:58