What I really want to do is to upgrade hardware components to support 'print recovery' after a power outage.
$\begingroup$
$\endgroup$
1
-
1$\begingroup$ That's an option you need to activate in the firmware. $\endgroup$– 0scar ♦May 28, 2020 at 22:19
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
0
Print recovery can be achieved by changing the firmware.
Here is some information on how to do that: Marlin documentation
Also, this another stackoverflow post about that: Stackoverflow Post
