I installed a BLTouch bed leveling probe on my printer which uses Marlin 126.96.36.199.
Now the printer seems to be of two minds when it comes to finding the origin. Homing XY moves to the lower left as it always has, but homing Z moves not only to Z=0, but also to the center of the build plate. The printer knows this is (100,100,0) and is not mistakenly thinking it is (0,0,0).
This causes some issues such as now the nozzle wipe at the beginning of a print happens right in the center of where the print is supposed to be.
Is this expected behavior?