How to move Z-axis to a specificic position (Z-max) after printing?

Question

I have a Cartesian printer in a cubic format (the bed moves vertically) with Marlin 2.x

I am not finding a way to make it move to Z-max (23 cm) when finishing the printing.

The idea is to lower the bed all the way to the max, to make easy removal of the printed piece.

Answer 1

To move the bed down, you simply instruct the bed to do so after the print.

The best way to do that is add a G-code line to your "end G-code" script you find in your slicer you use.

Just add the line:

G1 Z230 F500

With this command you instruct the bed to lower to your maximum Z height at speed (feed rate) 500 mm per minute.