I have an Ender 5 with an auto bed leveling sensor (TRU-LEV 600).
It is working fine, however, as the sensor probes the bed, the nozzle and the bed cool down and are not staying heated as it is getting the points, even though they were heated up in the first place.
How do I stop the bed and hotend from cooling down while the bed is being probed?
Here is my start G-code:
M75; Start Print Timer and Engage Fil Sensor if USB Printing G92 E0; Reset Extruder distance to 0 G1 E-2; Retracts filament to prevent blobs during probing M84 E; Disable E Motor for probe accuracy on direct drive systems G28; home all axes G28 Z; home Z to get more accurate Z position G29; TRULEV mesh generation G4 S10; wait for heaters to recover M117 Purge extruder G92 E0; reset extruder G1 X0.1 Y20 Z0.3 F5000.0; move to start-line position G1 Z1.0 F3000; move z up little G1 X0.1 Y100.0 Z0.3 F750.0 E15; draw 1st line G1 X0.4 Y100.0 Z0.3 F5000.0; move to side a little G1 X0.4 Y20 Z0.3 F750.0 E30; draw 2nd line G92 E0; reset extruder G1 Z1.0 F3000; move z up little M117 Printing.....