0
$\begingroup$

Does anyone know where I can find a list of recommended settings for different types of resin / print objects for Anycubic printers?

I realize that some of the details will need to be tweaked on a case-by-case basis, but having some general starter information (exposure times for first 6 lines + rest of the print, step settings based on type of print, etc) would certainly be better than starting "cold".

It seems like this information should be gathered somewhere, either for ALL printers, or separate ones for each type of printer.

$\endgroup$
1
  • 1
    $\begingroup$ Did the answer help you solve your problem. If so, please mark as the accepted answer - that way your question can be removed from the unanswered question list. If not, and you found another solution, please post that answer. Thanks. $\endgroup$
    – Greenonline
    Jul 10 at 9:47
1
$\begingroup$

Times are not dependant on the printer but the resin. Please look at the resin's label, which should have recommended settings.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.