So I have been having an ongoing problem with my printer that I just can't solve. I don't usually ask the questions on stack exchanges until my problem gets unsolvable. Unfortunately like this one
Printer: Creality Ender 3 V2
Current Board: Creality v4.2.7 (Silent Motor)
Background: This started when I accidentally fried the T20 chip on the v4.2.2 mainboard when I tried to install the BLTouch incorrectly (I looked at the photo upside down) and and also accidentally pulled the wire out and what I guess is why the T20 chip was fried. I thought at first the PSU was the one causing the trouble at first so I replaced it. Then found the burnt chip and decided to upgrade the board to a v4.2.7. I installed everything correctly according to a video that I found somewhere on YouTube.
Current Problem(s): When I turn on the machine the light on the mainboard is on but there is continuous beeping coming from the display with small clicks like a clock every 1 sec. or so. The backlight to the display is on but nothing is shown. I just found with a multimeter that the bed and nozzle terminals give no volts back.
Update [3/24]: Found that the firmware seems to not flash even after giving the .bin file a different name.
Extra Thoughts: I currently have no idea what to do. I think I might replace the LCD and its cable. I have only printed a few things and just want to get back to it but I don't want to buy a whole new printer to do so. I feel like I get closer to getting back to it every time I fix something but I'm starting to lose hope that it's just a never ending problem loop. I appreciate any help given.