# Printed object is half the height it should be

I am having extreme extrusion problems with my Ender 5. I had nearly perfect quality since I got it about 2 years ago but recently I replaced the board with a Creality 4.2.7 Silent Board and I'm having some problems. I've calibrated the E-steps to where is consistently extrudes 100 mm but what should be a 20x20x20 mm cube is 20x20x10 mm (as shown in the picture). Since I haven't really had experience with this sort of problem yet, I have no idea how to fix it.

With M92 you can get and set the correct value:
Get the current steps-per-unit settings using M92 with no parameters or M503 on older versions of Marlin.