Printer doesn't print perfect circles while calicat is perfect and top layers look weird on Ender 3 Pro:
I used Cura and an Ender 3 Pro, eSun PLA+, print at 210 °C.
$\begingroup$
$\endgroup$
1
-
$\begingroup$ Are the belts tight? $\endgroup$– 0scar ♦May 8 at 1:33
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
Try printing a 20mm reference cube and verify the dimensions. Also calibrate your extruder - it looks "fat" to me like there's just too much plastic.
I print the same filament at the same temperature, on an ender3 v2 so you're in the right area for temperatures.
