I have an Artillery Hornet printer that I am very satisfied with. I make my models in Blender, export them as STL files, and import them into Cura slicer. Everything works great with no problems, mostly. But yesterday, I made a model that I used a reference image in Blender (deleted it before exporting then). And when I printed it, direct afterward, the printer unloads the filament. I tried to print it multiple times and every time it did the same. No big problem then, but a bit annoying.
Does anyone have any idea what could cause this, and how to prevent it? Other models I make in Blender have not given me that result then. I still have not tried making other models with a reference image to compare the result. So I found this place first and try to ask if someone knows about that problem.
This is the end G-code:
G1 E-6 F9000
M104 S0 T0 ; turn off temperature
M140 S0 ; turn off bed
G1 X110 Y220 F10000
M84 ; disable motors