I'm familiar with 3D printing, and the G-code concept. I'm also comfortable with programming.

Can anyone give me the G-code (or probably the M-code, actually) to read the bed temperature?

Is there an equivalent of M105 (Get Extruder Temperature)?


M105 should give you the bed temperature.

For future reference you can find a general list of G/M codes here - RepRap Wiki - G-code.

Most firmware files include a list, Marlin has it in Marlin_main. I have no idea how often the list is updated but they don't change often.

  • $\begingroup$ M105 is the extruder temperature. I can''t find a way to get the bed temperature, though there is a code to wait until the bed has reached the target temperature. $\endgroup$
    – NomadMaker
    Mar 1 '18 at 14:27
  • 2
    $\begingroup$ @NomadMaker M105 should report the temperature for everything. $\endgroup$
    – tjb1
    Mar 1 '18 at 17:08
  • $\begingroup$ @NomadMaker please look into marlinfw.org/docs/gcode/M105.html $\endgroup$
    – 0scar
    Sep 7 '18 at 13:27
  • $\begingroup$ Your Marlin_main link had died, so I changed it $\endgroup$
    – Greenonline
    Sep 11 '18 at 14:20

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.