I changed the filament (PLA) in my Wanhao Duplicator I3+. I ended the first try to print when I saw that the 'lines' were too thin. I re-sliced with a higher temperature (195°C instead of 190°C). Now the print started without a problem but after about 25% no more filament came out of the extruder. What can be the reason and how can I resolve it?
The filament is from Vertex, grey. The object that I use to test is a 20 mm hollow cube from Thingiverse that I have used for the previous filament too.
I am not sure that this is a clogging problem since the print starts with no problems. It just stopped after 25%. When I started another print I was able to finish by increasing the temperature.