I have a Tevo Tornado that I've outfitted with an official BL-Touch auto level sensor. I can see the bed probing run, and I can see the Z axis slowly adjust during x/y moves, so it's doing something. However, you can see that there appears to be a systematic tilt:
Any ideas what could be causing this? The bed, gantry and print head is tight, no wobble. Here's my start code:
G28 ; home all axes G29 G1 Z5 F5000 ; lift nozzle
I have mesh leveling enabled with a 5x5 grid and correct probe offsets. The bed itself is on PETG printed standoffs instead of springs to eliminate any jitter.