Linked Questions

2
votes
2answers
463 views

Dramatic failure of calibration print

I printed out this calibration shape from Thingiverse with an unexpectedly catastrophic failure. It looks like there are a lot of things wrong here. I used the ...
1
vote
1answer
1k views

Infill not printing well. What I am doing wrong?

I am a new to 3D printing, somehow, the infill of my print compiled by Cura 4.5 is weak. I print with generic PLA (FD plast) on 200 °C. See image below: Print details: I have a Zonestar Z6FB which I ...
0
votes
1answer
646 views

Calibration of Z axis in Simplify 3D

I'm using Simplify3d and a DIY 3D printer. The printer works fine and I've printed very nice objects with very smooth and beautiful surfaces BUT they are twice as tall as they should be! It is like ...
1
vote
1answer
480 views

Getting the Turnigy Fabrikator Mini V2 to a usable state

I recently bought a second hand Turnigy Fabrikator Mini V2, which, as far as I can tell, is a rebrand of the Malyan M100. After my first few prints I noticed that my prints were very stringy and the ...
3
votes
3answers
108 views

Thin bead not adhering to itself or bed very well, what am I doing wrong

I'm just learning how to use a 3D printer, I have an Anycubic Mega Zero 2.0. When I start printing the PLA filament doesn't want to adhere very well. I have leveled it out and all of my corners on my ...
1
vote
2answers
196 views

Sketchup designed object printing first layer incorrectly

I am a 3D printing beginner but wanted to get stuck in straight away and design my own 3D objects. I used Sketchup to design a badge of one of my logos. I make sure that all faces of my object are not ...
1
vote
0answers
138 views

PyCNC - How to configure for my setup?

I have replaced the main board of my Anet A8 printer with a Raspberry Pi based one, running PyCNC. After many issues I have finally got to a point where all the motors work as well as heating and ...
1
vote
0answers
102 views

Filament getting stuck after 1.5 hours of printing

Problem: After about 1.5 hours of printing on my modified Anet A8 the (converted to Bowden) extruder begins to make a clicking noise. The filament is not being pushed through the hotend (E3D V6, it is ...

15 30 50 per page
1
2