Questions tagged [acetone]
For questions about the acetone chemical - a chemical used to assist with finishing and smoothing 3D prints.
How to clean / remove frosting from build-surface
I recently got into 3D printing. Printer Setup Model: Ender-3 Board: 4.2.2 Firmware: Manufacture version of Marlin with BLTouch (Aug 2022 update) Auto-level: CR-Touch Bed Type: Stock --- Textured PEI ...
PRUSA likes the bed to be cleaned with isopropyl alcohol. What else should I use?
I have the original Prusa i3m3 printer. Prusa recommends cleaning the bed before each print with isopropanol (isopropyl alcohol), with only occasional cleaning with acetone. The textured bed ...
Acetone Smoothing an ABS Cone - (New to 3D printing)
Today marked my first time using a 3D printer - have to admit I was originally skeptical but am now incredibly impressed and am having to hold myself back from purchasing one for myself! Was a great ...
How does acetone "rejuvenate" PEI?
The Prusa3d knowledge base mentions that acetone will "rejuvenate" PEI in addition to cleaning oil and grease from the surface. About once a week, or when prints stop sticking, use ACETONE to clean ...
Acetone smoothing not working on ABSPlus-P430
I am using a STRATASYS Fortus 250mc to 3D print some parts. I have read a lot on internet and also on some scientific literature that Acetone dissolves ABS and cold/hot vapor has been successfully ...
I need an acetone substitute
Acetone is banned in my country, and I cannot get it. What substitute could I use?
Safety precautions when using acetone
Acetone can be used to smooth ABS prints. What safety precautions should be taken during its use?