Questions tagged [creality-cr-6]
The creality-cr-6 tag has no usage guidance.
18
questions
3
votes
1
answer
721
views
Why does Prusaslicer set the final temperature in two steps?
I'm using PrusaSlicer 2.5.0 and printing the sliced G-code on a Creality CR-6 SE via a USB-connected OctoPrint/OctoPi. As you can see, the slicer sets the temperature by G-code commands in two steps (...
0
votes
0
answers
2k
views
Installing Creality CR6 SE Community firmware
I want to know how simple is it to install CR6Community firmware
https://github.com/CR6Community/Marlin/releases
I do not want to make low-level modifications for it. And also I want to know how ...
3
votes
0
answers
47
views
Random Line on some 3D prints
I have been having an issue for a while now with my 3D Print that one of the layers will appear thicker than the rest.
The line artifact will be on different height level. Also not all models that I ...
3
votes
3
answers
526
views
Prints not sticking to bed or just not extruding?
I'm very new to 3D printing. When my printer was new, I got loads of really good prints, however, now they're all failing.
I suspected that the nozzle was in bad shape, so I replaced it, but even now, ...
0
votes
0
answers
177
views
Quantum PLA stops extruding, other PLA works fine
I recently tried to use Matterhackers Quantum filament and I've run into some issues and curious if anyone else has. I have a CR6-SE with community firmware, a regular Bowden tube with upgraded ...
0
votes
0
answers
69
views
Static electricity underneath the print with mystery adhesion and warping
Any idea what could be causing a static discharge on large prints? It seems that it's mostly visible when it's done and the print is being removed, it keeps zapping (can barely feel it. Small prints ...
0
votes
1
answer
620
views
Creality CR-6 SE heatblock replacement
Recently I broke the threads inside the heatblock of my CR-6 SE by tightening the nozzle too much (it seemed not deep enough). No problem - bought a new hotend extruder kit for around 35 euros.
I put ...
0
votes
0
answers
465
views
CR6-SE issues after a year and ~15 kg of PLA
I've had a CR6-SE for just over a year now and am not new to 3D printing. However, prior to this I had access to a pretty much brand new Ultimaker S5.
When my CR6-SE arrived, it was essentially plug ...
1
vote
1
answer
710
views
CR-6 SE rebooting at fixed moments in print
My printer seems to be responding poorly to some of the prints I provide it with. At a certain time, usually after at least half an hour.
For example, the print I tried today (twice) kept crashing ...
2
votes
1
answer
108
views
Shocks and enclosures
I have a Creality CR-6 SE running Community firmware. It's printing mostly well, in part because it's improvisationally enclosed (sheets of cardboard between it and the closes window to reduce draft, ...
2
votes
1
answer
1k
views
Creality CR 6 SE Z-axis issue
My new Creality CR6 SE was doing good but suddenly its Z-Axis (head extruder) randomly sometimes stays above the required configurations and sometimes below.
For example after auto leveling when I ...
1
vote
0
answers
116
views
Creality CR 6 SE firmware
I recently bought Creality CR 6 SE, I learned there are third party firmware available, I want to know which one is best known for CR-6
1
vote
1
answer
689
views
How to restore languages to Creality CR-6 SE after firmware update?
I have been battling print issues since my purchase of a new Creality CR-6 SE. I chose to do a firmware upgrade to see if it's perhaps a patched issue. I used the Creality Download page and downloaded ...
2
votes
1
answer
1k
views
Raising E-steps on my CR-6 SE makes the extruder choppy
I have the community edition of the firmware for my CR-6 SE printer installed on a BigTreeTech SKR-CR6 V1.0 board. This firmware has a nice E-step calibration guide you can use to easily get the ...
1
vote
1
answer
598
views
Weird pattern on vertical surfaces on all prints
I recently received my Creality CR-6 SE printer and upgraded the controller board to a Bigtreetech SKR CR6 V1.0 and installed the latest community firmware.
As you can see on the attached image, the ...
0
votes
1
answer
567
views
What kind of thermal paste do I need for a heatbed thermistor?
I've got a new heatbed. The current heatbed has a screw in the middle of the bed with some kind of thermal paste (feels like silicone). Somebody on reddit said that it is very unlikely silicone, ...
1
vote
2
answers
2k
views
CR6-SE fails to heat hotend to set point
TL;DR - Please help me rebuild my CR-6 SE so that I can move on
Here's a link to the latest issue that I had to make proof of in a video: CR6-SE failed
Basically, it's failing to reach/maintain ...
1
vote
4
answers
2k
views
CR-6 SE glass build plate - no lifting possible
I've been dealing with 3D printing for 1.5 years, but now own a CR-6 SE myself since the beginning of 2021. Most things are already quite clear but for 2 days I have had a problem with the adhesion of ...