Questions tagged [creality-ender-3]

For questions about the Creality Ender 3 family of 3D printers

Filter by
Sorted by
Tagged with
0
votes
1answer
132 views

Casual under-extruding on Ender 3 (don't know what to do anymore!)

I own an Ender 3 that I bought in December 2018. I have now a problem with under extrusion that I don't know how to solve. I tried everything: I changed the nozzle, changed the PTFE, changed the ...
5
votes
3answers
8k views

What parts are suitable replacements for an Ender 3 Pro?

I'm new to 3D printing and I recently got my first 3D printer, an Ender 3 Pro by Creality. I've tried to find information about the type of nozzles should I look for. I'm trying to find stainless ...
2
votes
1answer
157 views

My first layer becomes solid when sections are supposed to have small separations

I've only been 3D printing for a few weeks and most of my prints seem to come out fine, but when I try to print models which require a small clearance between sections of the model, e.g. various ...
0
votes
0answers
1k views

Ender 3 overshot the set temperature and hitting MAX TEMP error

So for the past few months I have been printing in my Ender 3 and everything ran smoothly. But suddenly a few days ago I tried to print and the hot end temperature just keeps on rising past the set ...
0
votes
1answer
490 views

Very messy prints with lots of fuzz on edges

Recently my prints come out very messy. I tightened everything up and checked the extrusion multiplier. I have an Ender 3 Pro which I use together with Cura 4.2.1 (and Octoprint). I print in PLA at ...
2
votes
1answer
127 views

How can I solve the problem of line distortions on my prints?

Hello guys I have a little problem with printing. Whenever I print something there are always these lines my printer does, it's not a very big deal, but it looks rather ugly and I'd really appreciate ...
1
vote
3answers
992 views

Does this microstepping test result indicate need for TL smoothers?

Note: The "TL smoothers" referred to in the question title are an arrangement of 8 diodes that presumably both provide a voltage drop to address the minimum current output issue of some stepper ...
1
vote
1answer
146 views

Should I remove Cmagnet base for installing glass bed?

I was using Ender-3 Pro's CMagnet bed but I switched to glass bed (because original bed is warped) and left the magnet base (not the bed itself but the glued bed which CMagned sticks) on heated bed. ...
1
vote
0answers
43 views

Per-Model Bed Adhesion in Simplify3D

I'm looking for a way to have different bed adhesion for different models in the same print. My question is similar to this question, but I'm using Simplify3D. I have an STL file that contains many ...
3
votes
2answers
1k views

Issue with 3D printer making super thin layers

Recently I've been having trouble printing properly on my Creality Ender-3 printer. I ran a pretty long print (approx. 15 hours) that turned out really well. I then started printing an attachment for ...
0
votes
0answers
86 views

Ender 3Pro Calibration problem

I have a new Ender 3 Pro. I set it up and everything seems to work. I configured as such that the nozzle is only a sheet of paper apart from the bed. When I go to print, the extruder raises 2-3 ...
0
votes
1answer
52 views

3d printer recommendations that can print fidgets? [closed]

I am looking for a cheap 3d printer that can print this: https://www.thingiverse.com/thing:1307100 and is hopefully under US $200, such as the Creality Ender 3, Monoprice Select Mini Pro and V2, the ...
0
votes
0answers
46 views

Weird deformities on surfaces with ender 3 [duplicate]

Today I noticed some weird holes/deformities on the surface of this simple usb holder I printed. Since I'm fairly new to 3d printing I have no idea what may be the cause of this problem My printer is ...
3
votes
2answers
1k views

Ender 3 cracking magnetic bed

My first magnetic bed mat for my Ender 3 Pro is cracking underneath. On the top side there is a bubble in the middle which prevents any viable print. The layers are probably separating. I am new to ...
1
vote
1answer
912 views

Is there any way to correct uneven bed temperature?

I'm using an Ender 3 Pro with stock heated bed & glass build surface on it (without any base of stock magnetic plate). My heated bed looks completely flat too despite of many uneven Ender 3 heated ...
1
vote
4answers
729 views

Options for getting a really flat build surface

I've been fighting on and off with issues with my build plate seemingly not being perfectly flat. I've ordered a machined straight-edge and some new feeler gauges to diagnose the problem (and test any ...
2
votes
1answer
2k views

All-metal hot-end Creality Ender 3 Pro jamming issues

I have a Creality Ender 3 Pro printer, and just installed the Micro-Swiss All-Metal Hotend for CR-10 S Pro. After installing following the video instructions by Micro Swiss and Teaching Tech, I set it ...
1
vote
1answer
50 views

Poor surface quality when sweep interrupted

I just started 3D printing a few weeks ago, so I'm still trying to get a handle on the tricks. I printed something with a flat surface and a few raised pieces (shown below). I'm pretty happy with the ...
5
votes
2answers
78 views

Issue on 2 corners but not the other 2

I am printing using an Ender3 Pro with eSUN PLA+ 215/45 and I am getting this issue on two corners, the other two corners look fine. Any idea on what can be causing this? The bad corners The good ...
6
votes
4answers
253 views

Great prints then suddenly terrible quality

I've been printing with my Ender 3 for a while now and it's been great. I've had very few problems - depending on my settings, these are my typical first layers: However with no settings or ...
2
votes
2answers
316 views

Can you fix a warped, removeable build surface backing?

I have an Ender 3 with a removeable build surface. The build surface backing has become warped - the center is at least 0.3 mm higher than the corners. I'm not sure what the material of this plate is -...
2
votes
4answers
2k views

Thread pitch of Ender 3 bed leveling screws

What is the thread pitch of the Ender 3's bed leveling screws? The diameter measures about 4mm. Are they M4 0.7 (coarse) pitch or 0.5 (fine) pitch? I'd like to develop rigorous formulas for the amount ...
2
votes
2answers
412 views

Does moisture cause warping?

I'm printing flat objects (like rectangular) with PLA on a glass bed and 70 celcius degrees (also tried 75 celcius too, 65 celcius and lower ends with adhesion problem in general). Also I use brims ...
3
votes
2answers
3k views

Ender 3 BLTouch fails in assorted ways

My recently installed BLTouch probe regularly fails to perform ABL properly. There seem to be 3-4 failure modes: Probe manages some points but fails partway through, with a "probing failed" message ...
3
votes
3answers
7k views

Filament Leaking During Automatic Bed Leveling

Before the print has actually started I have set up Auto Bed Leveling using a BLTouch sensor, during the period that this runs I find that material leaks out of the nozzle and curls back onto itself ...
2
votes
0answers
63 views

Ender3 printing flattened on X axis

I'm fairly new to the amazing world of 3D printing, with an Ender3X. Default model (the dog) worked very fine, but I'm experiencing some issues with some of the printer improvement parts I decided to ...
0
votes
0answers
511 views

How to get stuck filament out of this direct drive extruder?

I recently installed a "Direct Extruder System" on my Ender 3 using a 3D printed mount. For the first few minutes it worked fine, but after I looked at it once again, I saw that there's nothing ...
5
votes
4answers
3k views

Random lines are being printed?

I recently got a Creality Ender-3, and tried printing a few things for some tests. I’ve printed a cube and just printed a cylindrical tube today, and I notice each time, it adds this random line on ...
2
votes
0answers
4k views

How do I install the USB drivers for Bigtreetech's SKR Mini E3 v1.2?

I want to install the USB drivers for the BIGTREETECH SKR Mini E3 v1.2 from the GitHub page but I don't know how to proceed. Any help will be greatly appreciated.
3
votes
1answer
3k views

Saving BL Touch settings

I have an Ender 3 Pro with a BL Touch. In my G-code should I add an M500 after the G29, to save the results to the EEPROM? I ...
0
votes
0answers
52 views

Ender 3 with slic3r causes the head to go off the bed

I just downloaded slic3r and setup my settings on it, but when I sliced and started the print, the head went off the bed and then tried to print. It doesn't matter what I set the origin to, it still ...
4
votes
1answer
3k views

Klipper doesn't seem to adjust Z after BED_MESH_CALIBRATE

My rig: Ender 3 BLTouch Octopi Klipper Solid bed mounts I've updated my start G-code from Cura to include a G29 right after G28...
5
votes
3answers
12k views

Strange layer separation issues on Ender 3

I got my Ender 3 a couple weeks ago. Within a couple days of test prints, I was able to get it working pretty well. Prints looked great. However, I installed a more permanent solution to my X-Gantry ...
4
votes
2answers
1k views

G28 ignoring Z-Probe X/Y Offsets

I recently installed a SKR 1.3 Board with a 3DTouch-Probe on my Creality Ender 3 Pro. The probe works, G29 does its magic, but: If i issue a plain ...
3
votes
2answers
163 views

How to correctly clean the Lacquer from bed?

How can I correctly clean the lacquer from bed printer? I have used some ethylic alcohol (ethanol) to help cleaning But what is the best way to do it?
3
votes
1answer
2k views

Why am I getting Z banding/shifted layer on a single layer?

While I was calibrating my flow rate/extrusion multiplier, I noticed that one layer is shifted slightly. I wanted to re-print the cube in-case it was a fluke, but after two more prints, I saw that the ...
5
votes
1answer
2k views

Print Lines Aren't Joining Together

I have encountered a problem where the print lines are not joining together, when I remove it from the plate it turns into a stringy mess. I am not sure what the problem is because I print out models ...
4
votes
1answer
219 views

Ender 3 X-axis belt orientation

What is the correct orientation for the X-axis belt? I first thought to place the smooth side down to match the tensioner bearing, but then changed it to match the motor pulley.
5
votes
1answer
878 views

Ender 3 X-axis values are not correct

So I just got the Ender 3 and have been trying to print out a part. However, I noticed the printer is trying to print the part, which should be centered in the bed, on the left side. I performed the ...
4
votes
2answers
3k views

Flashing a bootloader on Ender 3 without Arduino

I just order myself an Ender 3 Pro which will come by the end of the week. Before it arrives I want to be ready to flash a bootloader onto it. I was wondering what other options there are to flashing ...
3
votes
1answer
5k views

How do I set the flow rate on my Ender 3 Pro and have it stay at that percentage?

I am trying to increase the flow rate on my Ender 3 from 100 to 108 % but every time I start a new print it reverts back to the old 100 % flow rate. I have clicked through the settings and pressed the ...
8
votes
2answers
3k views

Why doesn't PLA stick to heated bed?

I have a basic Creality Ender-3 with a black rough bed cover. I'm printing with PLA. After assembly, I printed 3 or 4 small toys sliced by Cura with basic settings. All were printed very well! ...
5
votes
1answer
1k views

Starting G-code for auto Z probe offset

So, I like to take off my glass build plate from my printer bed because I don't like to put any force on the bed bearings but this presents an issue. I have an inductive bed leveling probe and each ...
6
votes
3answers
955 views

Why did my printer's nozzle dig itself into my print?

I just completed my first print on my Ender-3 and when the print finalized itself the nozzle didn't elevate itself to clear away from the piece. I watched as the nozzle slowly lowered itself into my ...
1
vote
0answers
115 views

Ender 3 failing on brim for wide curves

When trying to print wide curves (~4inch radius), later layers of the brim seem to print too close (or over extrude, or otherwise collide) with previous layers, causing the previous layers to detach ...
7
votes
1answer
16k views

Why is the center of my glass print bed lower than the corners?

I have a new Creality Ender 3. I suspect that I have not adjusted the eccentric nuts correctly, on the X-axis head carriage mounts. Even after a glass bed upgrade, using the Level Corners routine ...
4
votes
1answer
3k views

Ender 3 Power Problem: Not starting up

I have a Creality Ender 3, I've had it for just under 2 years and during a print one morning it suddenly stopped and powered itself off. After checking the fuse and other electronic components it ...
4
votes
1answer
45 views

The part printed correctly except few layers

As you can see from the picture, the part is good except some missing layers near the bottom. I have tried to search for this problem but nothing similar appeared. So, what might be the cause and what ...
4
votes
1answer
6k views

How to fight lots of stringing with PLA at low temperature (185 °C)?

I just got my first 3D printer (Creality Ender 3) on Friday, 2 days ago. It works great, but for some reason I'm getting a lot of stringing on my prints, especially the ones where the extruder head ...
1
vote
1answer
109 views

Setting the startpoint of the EZABL 3x3 mesh

How do I set the startpoint of the EZABL 3x3 mesh. The startpoint is hitting my bed clip.

1
3 4
5
6 7