Questions tagged [flashforge-creator]

Questions using this tag should involve the Creator series of 3D printers that are manufactured by FlashForge Corporation

Filter by
Sorted by
Tagged with
6
votes
4answers
319 views

What determines print start location on the build plate?

I'm working with an older MakerBot Replicator clone, actually a Flashforge Creator 1, with original Creator firmware. I'm able to design objects, using Solidworks, and exporting the file as xxx.stl (...
5
votes
1answer
176 views

PLA Filament Not Softening During Load w/ FlashForge Creator Pro

Recently, after printing fine for several weeks, I've gone to load in white PLA filament into the right extruder on my FlashForge Creator Pro and the extruder is not pulling the white PLA filament ...
4
votes
1answer
103 views

Horizontal line z-axis not printing correctly

I have just started with the FlashForge Creator Pro using the FlashPrint slicer software. I have gotten some nice prints but I am having an issue with a certain print from this model of a knife. See ...
4
votes
2answers
270 views

3D printed part sticking to the support layer

I am using a Flash Forge Creator, and when I print big parts (only in this case) I have about 25% of the bottom of the printed object sticking very hard to its support layer. And I spend a lot of time ...
2
votes
2answers
5k views

PETG Sticking to Nozzle

For a while now, my AmazonBasics PETG filament has been working like a charm. Now, it is balling up on my nozzle. I've tried slowing it down, re-leveling the bed, etc. I don't want to go through the ...
2
votes
1answer
307 views

Extruder_2 Stepper Motor does not work

I have a FlashForge Creator Pro. It is equipped with the board revision V SF7.7. My Right extruder prints great, however, the left does not work at all. I have tried to diagnose the cause, but at ...
5
votes
1answer
159 views

Unknown issue affecting print quality

I have been having issues with a vase print using a FlashForge Creator Pro. I am using the default slicer for the printer(FlashPrint) because the Creator Pro only accepts ...
5
votes
3answers
292 views

Build plate cools during print

I am using a Flashforge Creator Dual Extrusion 3D Printer with RepG (ReplicatorG), and tonight a print completely detached from the build plate. I reset everything and watched it closely. It is a ...
5
votes
3answers
1k views

Nema Stepper used in Flashforge 3D printer

I am using Flashforge Creator Pro and a Flashforge Finder I want to know which NEMA stepper model is used in each of these two printers, or is it NEMA 17 for both? Their model numbers are: ...