Stack Exchange Network

Stack Exchange network consists of 174 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [monoprice]

Questions using this tag should involve a 3D printer that is manufactured and branded by Monoprice

4
votes
2answers
14 views

How do I calibrate the temperature of my hotend?

I'm using a Monoprice Maker Select v2 (a Monoprice-branded Wanhao i3 duplicator) and would like to calibrate temperature readings for my hotend. I used a thermal probe on my multimeter to determine ...
1
vote
0answers
22 views

“Missing” rows on 64x128 LCD after flashing Marlin 1.9 onto Monoprice Maker Select v2

I've successfully flashed Marlin 1.9.1 onto a Melzi v3.5 board (the stock board for my Monoprice Maker Select v2 (v2.1?, a white-labelled Wanhao i3 Duplicator). Initially after the flash succeeded ...
3
votes
2answers
48 views

What do you recommend for removing prints from Monoprice Maker Select bed?

I've been making some ABS prints, but it's really hard to remove it afterwards. I've read a lot of different ways of removing it, including using the included chisel/spatula, using air duster, 50/50 ...
5
votes
1answer
38 views

What is this part and does it have to do with my my z-position is messed up?

I recently bought my first 3d printer, a monoprice maker select v2. After a couple of print jobs, this piece fell out. I have no idea where it came from. But afterwards, I notice that my Z-...
4
votes
2answers
39 views

Monoprice Select Mini v2 - Some Prints Freeze

I am having an issue where several prints I downloaded from thingiverse causing my printer to freeze in the first minute of the print. The print head stops, pushes out a small amount of PLA and then ...
2
votes
0answers
35 views

Print Software for Monoprice Dual Extruder

Back in 2015 I bought the Monoprice Dual Extruder 3D printer (I know it was a clone of a FlashForge or a Makerbot, but I don't remember which). I played with it for a while but we moved and I never ...
3
votes
1answer
91 views

Monoprice maker select v2 doesn't extrude but is not clogged [closed]

So I have been printing lately, and got a new spool of filament. It will extrude when I pre-heat the nozzle and manually extrude it, however when I start to print, it doesn't extrude any filament. ...
5
votes
2answers
190 views

Apparently systematic nozzle clogging

A Monoprice Maker Select V2, upgraded incrementally with a Micro Swiss all metal hot-end, machined lever, and D4 extruder gear, systematically fails to produce complete prints, as seen below: The ...
5
votes
2answers
359 views

Compensating for smaller extruder gear [duplicate]

Assume somebody has a Monoprice Maker Select and has changed from the original brass extruder gear to a D4 Plus one, which is slightly smaller (10.6 vs 10.9 mm outer diameter). This person might be ...
4
votes
1answer
105 views

Under extrusion, looking for specific information

Have a Monoprice maker select with a Micro Swiss hotend, and am using Cura IIIP. Edit: plus Janbex PLA 1.75mm filament. Trying to print a Pi camera mount, but am getting (I believe) under extrusion, ...
4
votes
2answers
272 views

Monoprice Select Mini V2 retraction/stringing problem

I have a Monoprice Select Mini V2 and I’ve recently been having issues with little strings that are thick and sturdy sticking off of models: I used Ultimaker Cura v3.4.1 to slice this model: Basic ...
3
votes
1answer
206 views

Z-axis endstop not functioning after Marlin Firmware installation

I've had my Monoprice Maker Ultimate for a few months and have started doing upgrades to it. My most recent change is in upgrading the firmware to a newer version of Marlin so that I can better ...
5
votes
1answer
148 views

How to eliminate stringing and regulate flow rate?

I have been having a problem with stringing on my 3D printer, so initially I increased retraction distance from 6.5 mm to 8 mm. Then I tried again, with the same issue, so I increased ...
3
votes
1answer
309 views

Adjusting Z-axis (Monoprice Maker Select)

Have a Monoprice Maker Select v2 and have recently changed to an Anycubic Ultrabase glass plate. In Cura, the model I am printing is in the middle, as shown here: but the printer puts it around 2/3 ...
2
votes
2answers
173 views

Gaps in Cura's Slicing for Monoprice Select Mini V2

Why does this happen (circled in red), and how can I fix it? It is making my prints come out horrible. Not shown in the picture, but the option "Coasting" was Enabled: Coasting Volume 0.064 mm3 ...
4
votes
2answers
900 views

Z-Axis zero/home position is higher than the actual print starting position

I'm having an issue with my very first printer, a Monoprice Select Mini V2. After doing about 20 successful prints on it, the Z axis is suddenly acting very odd. When I 'home' the Z axis and move the ...
4
votes
4answers
198 views

What is causing the walls of my prints to separate?

I have been having an issue with certain portions of the walls of certain prints becoming separated from the rest of the model. It happens with smooth vertical edges. Specifically, this model, ID ...
5
votes
2answers
392 views

Getting bumps/warts on surface, Cura doesn't want to comb?

I have not been able to print smooth and round shapes using Cura 3.3.1 (or earlier) without bumps. I think they are seams? The filament is PLA. Combing is enabled, which I thought makes it so that ...
2
votes
1answer
243 views

Monoprice Select Mini v2 reattach boden tube to feeder head

I have a Monoprice Select Mini v2. The Bowden tube has detached from the filament feeder head... it was actually pushed out by the filament (175 PLA) as it fed. It appears to have been held in ...
6
votes
3answers
3k views

What is the largest microSD card that a Monoprice Select Mini can read?

I have a Monoprice Select Mini v2 and it came with a 256 MB SD card. I have a bunch of 16 GB cards. I have made sure that the new SD card has a FAT32 filesystem. I copy the gcode file onto this card ...
6
votes
1answer
591 views

Z motor not moving during auto home

My Monoprice maker select recently fried its melzi board. So I went out and purchased a ramps 1.4 kit. I've wired it all up and Flash the firmware with marlin(most recent build). When it boots up ...
3
votes
1answer
207 views

single point z-correction after 3-point auto-leveling

On my Monoprice Delta Mini, autoleveling is performed based on three push buttons, on which the printer platform rests: The nozzle moves downwards until one of the buttons detects being pushed down. ...
6
votes
1answer
5k views

Monoprice MP Mini Delta - How to get started?

I just got a Monoprice MP Mini Delta from an Indiegogo Campaign, but it came with no printed docs. How do I get started?
0
votes
1answer
377 views

Monoprice Select Mini v2 clogged Boden tube connection

I have had my Monoprice Select Mini v2 for about two weeks now and I get a clicking noise on my filament insert on some prints and when I check a few minutes later, I can see that it's not extruding ...
5
votes
3answers
440 views

What tweaks do slicers use to get rafts to stick?

I've always had trouble getting prints to stick directly on my bed, but had great reliability when use rafts. This didn't present a problem when I was using PLA, but I recently got a roll of PETG and ...
3
votes
1answer
668 views

Monoprice Maker Ultimate Extrudes Too Much Filament At Start

Today I received my Monoprice Maker Ultimate 3D Printer. It is a rebranded Wanhao Duplicator 6 for reference. I am using the default settings for a Wanhao Duplicator 6 in Simplify3D. Here is the ...
4
votes
1answer
3k views

Maker Select Plus 3D Printer Head Size Settings for Cura

I want to print multiple objects in a single G-code file on my Maker Select Plus 3D Printer. On the Cura "Machine>Machine Settings..." menu, what are the correct settings for "Printer head size" in ...
7
votes
1answer
8k views

What are the “magic numbers” on a Monoprice Select Mini?

What are the "magic numbers" people refer to regarding print resolution on the Monoprice Select Mini?
2
votes
3answers
406 views

Printer changing temperature after selecting file

I have just got a Monoprice Maker Select 3d printer (which is really just a Wanhao Duplicator i3). I want to print a model that came on the included SD card (...
6
votes
1answer
645 views

Monoprice Select Mini - Detached Filament Feeder fitting

The $200 Monoprice Select is inexpensive but also cheap, so experiences I've seen appear to involve lots of repairs. In spite of that, I've bought one, as I'm able to fix things (sometimes) and the ...
3
votes
2answers
2k views

Updating firmware on Monoprice Architect printer

I just received this printer and while it seems to talk to Makerbot Desktop software I'm not sure if I should be trying to update the firmware. The printer comes with firmware v7.2 and while Makerbot ...