Questions tagged [prusaslicer]

For questions regarding the slicer maintained by Prusa Research.

10 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
2
votes
0answers
84 views

Weird solid infill for chamfer

I am very frustrated with some weird solid infill issue, mostly due to sloped wall such as chamfer for fillet. Here is an example. I have a 20x20x20 mm cube with 2 mm rounded chamfer at the ...
1
vote
0answers
48 views

Print quality ruined after firmware update i3 mk3

I'll try to give as much detail as I know here but let me know if there is anything missing. I have a Prusa i3 MK3 that I got in about 2018 and it was working perfectly fine. Print quality was pretty ...
1
vote
0answers
211 views

Prusa MINI 0.6 mm nozzle print fail

Setup: Prusa MINI with 0.6 mm Nozzle. Firmware 4.0.5 Bootloader version 1.0.0 Buddy board 1.0.2 Prusa Slicer 2.2.0 Using the OctoPrint 1.4.0 on OctoPi 0.17.0 with serial connection. Find the G-...
0
votes
0answers
25 views

PrusaSlicer not making sense

I'm using PrusaSlicer 2.3.1 on a custom delta. I'm printing a basic 25x25 mm cubic shell for calibration purposes. It keeps setting the print speed to 20 mm/sec despite there being no speed ...
0
votes
0answers
27 views

Can I change the print speed 150 % for a specific layer range?

Can I change the print speed (150 %) for a specific layer range in PrusaSlicer; range is pointed out below:
0
votes
0answers
77 views

Flow + Line Width = over / under extrusion, how does that work?

I am just trying to deeply understand relations between those parameters. I am not a noobie, but just trying to be more smart with a printer, instead of changing parameters randomly to see effects on ...
0
votes
0answers
259 views

What firmware type to use for FLSUN 3D printer in PrusaSlicer setup?

I have a FLSUN printer: 3D Printer DIY Kit Auto Leveling Cube Full Metal Square Large printing size 260X260X350 with heated Bed Precision. I plan on using PrusaSlicer as slicer (found it in Ubuntu.) I ...
0
votes
0answers
33 views

Extruder motor not running when using G-code from PrusaSlicer with non Prusa printer

I just assembled an FLSUN QQ-S pro printer and successfully printed two models from the supplied SD card. Everything works fine. However, I tried slicing my own model using PrusaSlicer and although ...
0
votes
0answers
375 views

Has anybody successfully used Prusa Slicer with the FlashForge Adventurer 3?

I am trying to get rid of the FlashPrint slicer that comes with the Adventurer 3 due to its limited capabilities - to no success. Cura works to some extent, Simplify3D lacks some bottom layer patterns ...
0
votes
0answers
54 views

Printer keeps pausing and restart during print process

I'm using Marlin bugfix 2.0.x with my custom printer. Sliced a test cube with PrusaSlicer 2.2.0. My printer starts printing ...