I am printing this piece using a 0.4 nozzle. It happens that the piece on the chin does not print that place. I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens, I include photos of my configuration  cura

[![enter image description here][1]][1]
.

[![enter image description here][2]][2]

[![enter image description here][3]][3]


[![enter image description here][4]][4]


[![enter image description here][5]][5]


  [1]: https://i.sstatic.net/rXeqU.jpg
  [2]: https://i.sstatic.net/Y5jNA.jpg
  [3]: https://i.sstatic.net/qyU86.jpg
  [4]: https://i.sstatic.net/FjoE5.jpg
  [5]: https://i.sstatic.net/qBADp.jpg