I got my first printer, a [Geeetech Prusa i3][1], and for the price I paid (160$) I am so blown away. Because I saved so much money I treated myself to a legit copy of Simplify3D, and am happy with it.

Im using white PLA filament (Supposedly 1.75 mm) with a 0.3 nozzle. Temps at 215-240 °C and bed at usually 90 °C (with hairspray it gives a nice shiny solid bottom surface). My goal is to print with 0.3 or 0.2 if 0.3 is to big for the nozzle (ideally a 0.3 nozzle can print 0.3 layer height).

**Here is my problem:**

It seems that, especially on the first layer with bigger prints, or any layer that continuously pulls filament through the nozzle (outside lining of a layer), the amount of filament that gets "printed out" isn't enough compared to the amount of filament that is pushed in by the extruder gear. This, in my theory right now, causes the new filament to stay in place until the melted plastic in the nozzle is used, which then makes room again for more filament to be pushed through. Until this happens, the gear slips/clicks and can't pull anymore filament.

The mechanics seem to work well, and I don't think the nozzle is clogged. I would guess that some settings need to be manually adjusted to keep the amount of filament pushed through the nozzle equal or less than the amount the nozzle can actually push through, but what is weird to me is that this happens semi-randomly. I have looked online and the symptom appears sometimes with other people, by I have not found a proper solution.

**What settings would I need to test?** 

I feel like this is the last thing I need to figure out in order to get amazing prints. My biggest print so far (Batman Bust) is amazing, but even here you can see certain layers where the gear couldn't push filament through and the gear skipped a few clicks, causing it to print less when it was suppose to print on the following instructions. This happens a lot more, but when it happens during an infill you obviously can't see it from the outside. The individual layer-height seems maybe a bit too small (0.1 for batman), and the times where the extruder usually skips and clicks appear when I print bigger sizes (0.2 and 0.3). I want to start printing more complex and bigger things, so using 0.1 seems like an overkill in detail and takes way too long.

Here is a link to [some current successful prints and batman layer mess up example][2].

Edit:

My filament is the generic Geeetech white PLA that I ordered together with the printer.


  [1]: https://www.amazon.de/dp/B075FQRNY3/ref=pe_3044161_189395811_TE_SCE_3p_dp_1
  [2]: https://1drv.ms/f/s!AnDfnxILoXLp9TWV9u0Ue1OEW1cL