Oh interesting. By slips, I take it you mean that the raw filament slips, not the print slips.

This will happen for a few reason. Fist the tooth gear that grabs the plastic is either
Worn out
Out of place
Not the correct distance from the guide wheel. 

This is all part of the mechanism that the smart extruder attaches TO. Not the smart extruder itself. You might be able to fix this yourself, worst case you will need a replacement assembly from makerbot. *I would look into online auction sites for the part*

Another option is to try thicker filament. Which you might be able to custom order. So instead of 1.5, maybe get 1.8. I am not sure where you can buy off sizes.

From there this machine might just be getting jammed. It happens to some machines. This again points to the base of the X axis assembly. 

Last which I would say is not likely as you have tried multiple extruders, you might have the nozzle becoming clogged. I often pop open my extruders *voids warranty* and clean them out. Also micro hand drills are a good option here.