Search Results
| Search type | Search syntax |
|---|---|
| Tags | [tag] |
| Exact | "words here" |
| Author |
user:1234 user:me (yours) |
| Score |
score:3 (3+) score:0 (none) |
| Answers |
answers:3 (3+) answers:0 (none) isaccepted:yes hasaccepted:no inquestion:1234 |
| Views | views:250 |
| Code | code:"if (foo != bar)" |
| Sections |
title:apples body:"apples oranges" |
| URL | url:"*.example.com" |
| Saves | in:saves |
| Status |
closed:yes duplicate:no migrated:no wiki:no |
| Types |
is:question is:answer |
| Exclude |
-[tag] -apples |
| For more details on advanced search visit our help page | |
Results tagged with power-supply
Search options answers only
not deleted
user 11157
A part of a device which converts the current of the power network to the properties required by the device.
3
votes
Accepted
Can I run a 15 AMP heatbed behind a 5 AMP IEC Receptacle?
The fuses on the board are for current pulled from the 24V DC. 15 amps of 24V DC is 3 amps of 120V AC, plus a little lost in conversion inefficiency in the power supply. If all of them were maxxed out …
1
vote
Effects of bad power supply on temperature/flow?
As worked out by dandavis in the comments, this is not plausible:
thermistors likely use 3.3v or 5v signaling. It would take a lot of sag for those rails to drop below set voltage if fed 12v or 24v; …
3
votes
Accepted
Klipper: power on before homing
Because of the way parameters work differently (Sx vs NAME=x) for gcode style commands vs Klipper extended ones, the rename has to be to the "same type" of command. G28_BASE does not fit the pattern t …
2
votes
Accepted
What filaments are appropriate for a case that will contain mains voltage wiring?
Any filament except made-to-be-conductive metal infused filaments should be capable of acting as a suitable insulator, but you'll also want to consider things like failure modes under overheating, mec …