New answers tagged

2

PETG is a material type that is only available for Fused Deposition Modeling (FDM) type printers. Those are limited in their achievable resolution by their nozzle size: the Smallest depression in a surface that is printable is about half a line width in XY and 1 layer height in Z. the smallest bulge from a flat surface that can reliably be produced by FDM ...


2

I assume you mean a resolution of 50 microns (0.05 mm step size) Most FDM printers can produce something useful upto 100 microns. If you want to print with more precision, try resin printers. The reason for this is that an FDM printer uses an extruder with a specific nozzle diameter (typically around 0.4mm and minimum around 0.25 mm). plastic has too much ...


Top 50 recent answers are included