New answers tagged

0

You do have hit the true home. You will have to physically move the endstop to alter that position. Your problem is, that the endstop-home is on the build area - and that is printer dependant. My Ender 3 has about 4 mm diagonal distance from the bed in its physical home, for which I accounted via a firmware swap, including a "virtual" firmware home....


0

Yesterday I has same error with board MKS Robin Nano with Marlin 2.0.6. Try to find and uncomment this definition: #define ENDSTOP_INTERRUPTS_FEATURE Failure was in disabled endstop interrupts and broken part of code, which going to home and unchecks endstop status between steps. But if you activated endstop before sending homing command - it will work as ...


Top 50 recent answers are included