New answers tagged mks
0
As far as I know, that should work. You need to define the correctly used drivers in your configuration. For the closed loop drivers, the board (via a break out board) has to provide the pulses to the motor driver (on the back of the stepper). If you use such a closed loop driver you need to disable the stepper driver type in your Configuration.h file for ...
Top 50 recent answers are included
Related Tags
mks × 11marlin × 4
stepper-driver × 2
kossel × 2
lcd-screen × 2
closed-loop × 2
creality-ender-3 × 1
troubleshooting × 1
heated-bed × 1
firmware × 1
hotend × 1
delta × 1
wiring × 1
retraction × 1
arduino × 1
tmc2130 × 1
flsun-3d-cube × 1
flsun-qq × 1
wi-fi × 1
display × 1
tmc2100 × 1