5

In answer to (doesn't have to the issue of the OP, but as a reaction for other readers): Note: this has nothing to do with bed leveling. The bed is level, the printer has a BLTouch. Having a BLTouch doesn't imply the bed is level! The bed is level when the nozzle moves in the same plane parallel to the bed, the bed shape is compensated for by the BLTouch, ...


1

The first thing that jumps out to me is where the frame is pushing on the switch. It looks to be directly over the switch actuator and not at the end of the little metal switch arm. This will make the gap from switch activation point to hard stop and bottoming out the switch really small. Any software delay after endstop detection or flex in the system may ...


1

I wanted to expand on the great comment by 0scar and explain what's the fastest way to change pins. I know this is an older topic, but for the sake of people looking for an answer, I figured I add this. First of all it's easiest to change the pins in the pins file for your specific board by simply renaming E0 to E1 and vice versa. This is much simpler than ...


Only top voted, non community-wiki answers of a minimum length are eligible