Hot answers tagged

2

This has nothing to do with OctoPrint itself, the cause is related to the printer itself, not the print server running the printer. This is a pretty commonly seen issue (usually seen at heated beds), this is caused by faulty wires/cables or connectors. This usually happens after a vast period of usage. You should (periodically) check the cables and ...


1

I have a Wanhao Duplicator i3 too. It does not matter a lot which ceramic wadding and / or kapton you use. The more you seal off, the better it works. If you have a full metal hotend and a powerful cooling blower and need temps above 250 °C, you might want to do the best you can with a good padding of ceramic and kapton. For normal operation, a half-done ...


Only top voted, non community-wiki answers of a minimum length are eligible