Tags

A tag is a keyword or label that categorizes your question with other, similar questions. Using the right tags makes it easier for others to find and answer your question.

× 8
In case you have trouble correctly identifying components of your printer.
× 8
For questions relating to changing filaments mid-print
× 8
× 8
should involve a 3D printer that is manufactured by Monoprice and branded by the name Maker Ultimate 3D Printer.
× 8
For questions about the Creality Ender 5 family of 3D printers
× 7
For questions about flexible filaments.
× 7
Originally means a data connection where a single bit of information is transferred in or out one bit at a time. Today it means a data connection following the RS-232 standard, either physically or ov…
× 7
for questions that are concerned with the choice of wire for transporting certain electrical currents (for powering electronics, motors or transport a certain stream of information) or ev…
× 7
For questions related to the usage of fans on 3D Printers for the cooling of electronics *not* the print
× 7
For questions regarding troubleshooting or setting up hardware acceleration settings for a 3D printer either digitally or electronically.
× 7
for questions on ventilation and filtration of spaces (e.g. enclosed build space or room ventilation).
× 6
for questions about the value of acquisition or repair of a certain object or process.
× 6
able to reproduce themselves, and are able to build parts to reconstruct copies.
× 6
A method of quick fabrication which produces a scale model of a part or assembly using CAD software, then printing in 3D.
× 6
for questions involving Microstepping
× 6
should involve the Tronxy X3 3D printer manufactured by Shenzhen Tronxy Technology Co., Ltd.
× 6
should involve the Adventurer 3 3D printer that is manufactured by FlashForge Corporation
× 6
for questions related to specific movement of the X direction of the printer - Questions about a machine or 3D model's X-axis
× 6
For questions related to the RAMPS controller board - The RepRap Arduino Mega Pololu Shield, or RAMPS for short, is an expansion shield for the Arduino Mega designed to fit the entire electronics for …
× 6
× 5
Questions about the second iteration of the Ultimaker printer and its variant versions, the Ultimaker 2+, Ultimaker 2 Extended and Ultimaker 2 Go.
× 5
The third iteration of the Ultimaker printer and its derivates.
× 5
× 5
a plastic that is used extensively in the Automotive industry due to its thermal stability.
× 5
For questions relating to the application of a graphical design to a 3D printed surface
× 5
For questions relating to medical usage of 3D Printed objects, including printing materials. Differs from the health tag, as health deals with the general health and safety aspects of printing, rather…
× 5
should involve the Tronxy P802 series of 3D printers manufactured by Shenzhen Tronxy Technology Co., Ltd.
× 5
For questions related to the use of masking tape, which is often applied to the print bed for adhesion
× 5
for questions regarding MicroSD card operation
× 5
for questions regarding SD card operation.
× 5
For questions dealing with 2D images and models
× 5
For questions about the acetone chemical - a chemical used to assist with finishing and smoothing 3D prints.