A tag is a keyword or label that categorizes your question with other, similar questions. Using the right tags makes it easier for others to find and answer your question.
should involve the 101HERO 3D printer manufactured by 101HERO LIMITED
should involve the 123D Catch software tool created by Autodesk
the process of creating a three dimensional digital representation of some object that, for instance, can be 3D printed.
3D Printer manufacturer. Their most known printer is the CreatorBot but use this tag if your question is about any of their printers.
A Z-probe based on a Hall effect sensor to enable determining the distance from the nozzle to the bed (and thus the level of the bed).
for questions on Acrylonitrile Butadiene Styrene, also known as ABS, a commonly used thermoplastic polymer.
For questions regarding troubleshooting or setting up hardware acceleration settings for a 3D printer either digitally or electronically.
For questions about the acetone chemical - a chemical used to assist with finishing and smoothing 3D prints.
Questions about part-to-platform or layer-to-layer adhesion while 3D printing.
should be used for specific questions about specific issues involving the Alunar M508 Prusa i3 3D printer.
For questions about analysis
should be used for specific questions about specific issues for the Anet A2 printers.
should be used for specific questions about specific issues for the Anet A6 printers.
should be used for specific questions about specific issues for the Anet A8 printers.
for questions about 3D printing with the micro-controller hardware platform Arduino. For general Arduino questions, please use the Arduino Stack Exchange site.
one of the most common microprocessor boards used to control 3D printers. If you think your Arduino is part of your issue, you can use this tag.
a plastic that is used extensively in the Automotive industry due to its thermal stability.