user avatar
user avatar
user avatar
Tormod Haugene
  • Member for 6 years, 5 months
  • Last seen more than a month ago
  • Norway
21 votes
Accepted

What are the pros and cons of collecting parts yourself, versus getting a DIY kit and then modifying it?

17 votes
Accepted

How is 3D printing done in space?

15 votes
Accepted

How to identify nozzle wear

15 votes
Accepted

Ideal print bed: Glass or Aluminium?

14 votes

Is there a G-code for waiting?

11 votes

What could be causing my y axis to slip?

10 votes
Accepted

How to configure Cura to run the Z probe before heating

10 votes
Accepted

Does the material a bed is made out of affect the cooling time of a part?

9 votes
Accepted

How important is the minimum layer height on a 3d printer?

8 votes

Is there any way to shrink 3 mm filaments down to 2.85 mm?

7 votes

Can I increase retraction length on an E3D v6 beyond 2 mm if I have a really long Bowden tube?

7 votes
Accepted

How to print edible food?

7 votes

How do I determine the acceleration value for my printer?

7 votes
Accepted

How to choose printer with dual extruder?

6 votes

How to 3D Print 5-pointed star object that doesn't have flat bottom and hole in the middle?

6 votes
Accepted

Any fix for PLA prints getting more brittle over time?

6 votes

How to automate printing of multiple parts continuously?

6 votes

How to print an overhanging arc

6 votes

What are some good FOSS or free tools for editing STL files for 3D Printing?

6 votes

It is worthwhile to protect electronics with a 3D printed PLA case?

6 votes

How small can I expect FDM 3d printers to print?

5 votes
Accepted

Getting better support than Slic3r generates

5 votes

Resolution Drawbacks

5 votes

Can I use a metal filament on M3D Micro (or Pro)?

5 votes
Accepted

Why does print fall apart at beginning of top layer?

4 votes

Printrbot going off axis when initializing

4 votes
Accepted

What is the influence of a lower BAUDrate?

4 votes
Accepted

Printing objects with holes using M3D Printer

4 votes
Accepted

How can I set the 1st layer after a raft in Slic3r to print at 1st layer speed

4 votes

Is it necessary to have both hot ends on a dual extruder printer at the same height?