LukeDunkley
  • Member for 1 year, 8 months
  • Last seen more than a month ago
Methylated spirits or turpentine to clean resin printer?
3 votes

I would personally stick to isopropanol. Be aware that 3D printing is a very expensive hobby, but health wise this is a better option. Methylated spirits can quickly become dangerous, and often can ...

View answer
Bad quality at horizontal faces
1 votes

This could be caused by under extrusion, often caused by the bed being too close to the hot end / extruder nozzle. You could try to relevel the bed, or change the screws so that the bed moves down ...

View answer
Cura Filling holes from a model from Blender
1 votes

I would recommend using an actual CAD/CAM program, such as Autodesk Fusion 360, instead of using a 3d model program. Not only will this be able to directly export you finished model to Cura, and the ...

View answer
All-metal hotends are less forgiving / not as good for PLA -- but how bad?
1 votes

Are they so bad I should plan on changing back to a PTFE hot end? No, all metal hot end are not that bad, and may even be beneficial when printing at higher temperatures. You mentioned that you want ...

View answer