Tomas By
  • Member for 4 years, 1 month
  • Last seen more than a month ago
Adjusting Z-axis (Monoprice Maker Select)
2 votes

I sawed off about 2 mm from the (bed) screw in the photo so it wouldn't catch on the screws of the Y endstop. It now works as before. If somebody has a more cerebral solution I will gladly `...

View answer
Build plate adhesion, PLA
Accepted answer
1 votes

I cleaned the bed with acetone and it seems to have helped, so presumably it was just a build-up of something.

View answer