Timeline for Klipper doesn't seem to adjust Z after BED_MESH_CALIBRATE
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 29, 2019 at 16:38 | vote | accept | ubiquibacon | ||
| Nov 20, 2019 at 7:11 | answer | added | ubiquibacon | timeline score: 2 | |
| Nov 20, 2019 at 6:15 | history | edited | ubiquibacon | CC BY-SA 4.0 |
added 21 characters in body
|
| Nov 19, 2019 at 9:14 | comment | added | 0scar♦ |
Your first layer is over-extruding somewhat causing you to hit the edges of the overburden. Also it looks as if your nozzle to build plate distance is a slightly bit too low, I would start increasing that little (in Marlin with M851).
|
|
| Nov 19, 2019 at 7:56 | history | edited | Greenonline♦ | CC BY-SA 4.0 |
Added image description and hover tag, added code formatting and gave the link context (title of linked to article)
|
| Nov 19, 2019 at 7:39 | history | edited | ubiquibacon | CC BY-SA 4.0 |
added 218 characters in body
|
| Nov 19, 2019 at 7:27 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Improved formatting; edited tags; edited tags
|
| Nov 19, 2019 at 7:20 | review | First posts | |||
| Nov 19, 2019 at 7:50 | |||||
| Nov 19, 2019 at 7:19 | history | asked | ubiquibacon | CC BY-SA 4.0 |